COMPUPRINT 10200 DRIVER DOWNLOAD

Paper Handling It is important to use the correct paper for obtaining the best performance. Close the packing box and fix it to the transport panel by means of the packing strip, inserting the plastic angles between the packing strip and the carton. Fix the packing strip with the corresponding clips. When repacking the printer always use the original packing material 1. Insert the plastic bag over the printer and the foam shells on both sides of the printer. If your printer is installed on a table, position the paper staple so that the paper is freely fed into the printer. Make sure the printer has been turned off for at least 15 minutes before starting any cleaning operations.

Uploader: Doukora
Date Added: 17 July 2016
File Size: 29.46 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 97623
Price: Free* [*Free Regsitration Required]

To unpack the printer proceed as follows: This number is represented by a decimal notation where the decimal values are divided by points in four fields. Always use a grounded outlet. Pay attention to the print head because it becomes hot during operation.

Compuprint 10200 User Manual

If you need to remove the upper push tractor, turn the printer off. The printer drivers of all Compuprint printers can be found at the Internet Address http: If your printer is installed on a table, position the paper staple so that the paper is freely fed into the printer. Find the Front2 push tractor among the accessories. Make sure that the printer compuprunt turned off for at least 15 minutes. To select compurint Front1 tractor paper path, press the key.

Related Drivers:  MOTOROLA W490 DRIVER

Compuprint | Thermal Printers | Compuprint Series

Setting Up Your Printer Consider the following points when you choose the location for your printer: The default values of the various functions are indicated in bold.

Remove the two foam 110200 on either side of the printer and the plastic bag covering the printer.

If you need to know any printer setting, and to check if the printer is working well, print the self- test. See the information table below: Page Print Matrix horizontal x vertical Draft Com;uprint HS Draft Normal Best Draft 10 cpi 9 x 12 12 x 12 12 x 24 36 x 12 36 x 24 12 cpi 10 x 12 10 x 24 30 x 12 30 x 24 micro 15 cpi 8 x To load paper in this way, it is necessary to install the upper tractor.

This setup defines the use of the LAN interface and is structured according to the interface specific parameters. Check if the paper perforation matches the tear-off bar on the printer. If the printer is installed on 1200 table, it is not necessary to connect the cmopuprint cable.

The following message is displayed: Find the packing material and the repacking kit. Emulation Options This setup defines the available options according com;uprint the selected emulation and is structured as follows: Disconnect the connector cable and press on the push buttons to disengage the Front 2 push tractor. Paper Handling It is important to use the correct paper for obtaining the best performance. Paper Perforation This function allows to move the print head aside the paper when the fanfold paper perforation passes between the mylar and the print bar, to avoid paper jams.

Related Drivers:  LOGITECH M195 MOUSE DRIVER

See before “Ribbon Cartridge Installation”. Hold the fanfold paper in front of the sprockets insert paper perforation on the left sprocket pins and close the sprocket cover. Free the shifter holder pushing the tab towards the rear and pulling the shifter holder up. Unlock the sprockets of the Front1 tractor moving the sprocket levers up. The operator panel enables you 1200 perform many of the printer functions including paper path selections, font selection and the printer setup.

Printer Compuprint User Manual pages.

Configuring The Printer The operator panel enables you to perform many of the printer functions including paper path selections, font selection and the printer setup. The Program setup printout indicates: Unlock the Front2 tractor sprockets moving the sprocket levers up.

Hold the fanfold paper in front of the sprockets and insert the paper perforation on the left sprocket pins and close the sprocket cover. Open the upper printer cover and remove the fixing strip from the print head.